Burstner CityCar 2016, Инструкция по эксплуатации

Страница: 85 / 150

85
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Appliances
9
Operating modes All heaters have two operating modes:
z
Winter operation
z
Summer operation
It is only possible to heat the vehicle in the "Winter" operating mode. With the
"Summer" operating mode only water in the boiler is heated. It is not possible
to heat the vehicle in this operating mode.
Selecting operating mode:
„
Set the operating mode using the rotary switch (Fig. 54,6).
The power supply of the heater cannot be interrupted by means of the 12 V
main switch.
The heater is operated exclusively with gas.
Winter operation The heater selects the necessary burner setting according to the required
room temperature. When the required room temperature is reached, the
burner is switched off. In "Heater and production of hot water" operating mode
(Fig. 54,5) water in the boiler is also heated. In the operating mode "Only
heater" (Fig. 54,4) the heater can be operated with an empty boiler.
Switching on:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Heater/
boiler".
„
Turn the temperature control knob (Fig. 54,8) on the operating unit to the
desired heating level.
„
Set rotary switch (Fig. 54,6) to winter operation "Only heater" (Fig. 54,4) or
to winter operation "Heater and production of hot water" (Fig. 54,5).
The green indicator lamp (Fig. 54,7) is on.
The circulation fan automatically switches on when the heater is activated.
Switching off:
„
Set the rotary switch (Fig. 54,6) to " " (Fig. 54,3).
„
Close the gas isolator tap "Heater/boiler" and the regulator tap on the gas
bottle.
After switching off the heater, the circulation fan may still run for a moment to
use up the residual heat.
Summer operation It is not possible to heat the vehicle in "Summer" operating mode. In "Summer"
operating mode, only the water in the boiler is heated.
Fig. 54 Operating unit for heater/boiler
1 Summer operation water tempera-
ture 40 °C
2 Summer operation water tempera-
ture 60 °C
3 Off
4 Winter operation "Only heater"
5 Winter operation "Heater and produc-
tion of hot water"
6 Rotary switch (external ring)
7 Indicator lamp "Heater operation"
(green)
8 Knob for setting the heater tempera-
ture
9 Indicator lamp "Heating up period of
production of hot water" (yellow)/
"Fault" (red)