Burstner CityCar 2016, Инструкция по эксплуатации

Страница: 87 / 150

87
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Appliances
9
Display The display is divided into four sections:
z
Status line (Fig. 56,2)
z
Upper menu line (Fig. 56,3)
z
Display area (Fig. 56,8)
z
Lower menu line (Fig. 56,5)
Switching operating unit on/
off:
„
Press and hold the rotary push button (Fig. 56,6) for approx. 3 seconds.
Both menu lines (Fig. 56,3 and Fig. 56,5) are displayed. The first symbol
flashes.
Carrying out settings:
„
Turn rotary push button (Fig. 56,6) until the required menu symbol flashes.
„
Press rotary push button.
„
Turn rotary push button until the required value is displayed.
„
Press rotary push button to save the value set. If you do not wish to change
the value originally set: Press back button (Fig. 56,7).
Switching on the heater:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Heater/
boiler".
„
Turn rotary push button (Fig. 56,6) until the heater menu symbol (Fig. 57,1)
flashes.
„
Press rotary push button.
Fig. 56 Operating unit with displays
1 Display
2 Status line
3 Upper menu line
4 Line voltage display 230 V (not used
here)
5 Lower menu line
6 Rotary push button
7 Back button
8 Settings and values display area
9 Timer display
Z
The heater is gas operated. Only the symbols for this operating mode are
shown in the display.
Z
Switching the operating mode on/off means switching between stand-by
and setting mode. In stand-by mode, the display alternates between the
room temperature and the time that have been set.
Fig. 57 Display
1 Heater
2 Hot water
3 Operating mode (only gas here)
4 Fan
5 Service menu
6 Timer
7 Warning symbol
8 Lighting (not used here)
9 Setting the time