Burstner A 650, Инструкция по эксплуатации

Страница: 208 / 262

208
A-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN
Maintenance
12
For safety reasons, spare parts for pieces of equipment must correspond with
manufacturer's instructions and be permitted by the manufacturer as a spare
part. These spare parts may only be fitted by the manufacturer or an author-
ised specialist workshop. The authorised dealers and service centres are
available for any spare parts requirement.
Here are some suggestions of important spare parts:
z
Fuses
z
V-belt
z
Windscreen blades
z
Bulbs
z
Water pump (submerged pump)
When ordering spare parts please indicate the chassis number and the vehicle
type to the dealer.
The vehicle described in this instruction manual is built and equipped to factory
standards. Special equipment is offered depending on its purpose or use.
When fitting special equipment check if such equipment has to be entered in
the vehicle documents. Observe the max. permissible gross weight. The
authorised dealer or service centre will be happy to advise you.
12.10 Vehicle identification plate
The vehicle identification plate (Fig. 233) with the chassis number is mounted
on the right hand side on the front.
Do not remove the vehicle identification plate. The vehicle identification plate:
z
Identifies the vehicle
z
Helps with the procurement of spare parts
z
Together with the vehicle documents identifies the vehicle owner
X
The use of accessories, parts and fittings not supplied by us may cause
damage to the vehicle and jeopardize road safety. Even if an expert's
report, a general type approval or a design certification exists, there is
no guarantee for the proper quality of the product.
X
No liability can be assumed for damage caused by products which have
not been released by us. This also applies to impermissible alterations
to the vehicle.
Fig. 233 Vehicle identification plate
1 Chassis number
Z
Always include the chassis number with all inquiries for the customer
service office.