Burstner A 650, Инструкция по эксплуатации

Страница: 146 / 262

146
A-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN
Appliances
9
To execute the individual switching commands, always point the remote con-
trol in the direction of the receiver.
Operating modes
z
Automatic
z
Cooling
z
Heater
Switching on:
„
Press the "ON/OFF" button (Fig. 157,7).
„
Press the "Mode" button (Fig. 157,10) as often as required until the
required mode (Fig. 157,1, 2 or 3) is indicated on the display. The corre-
sponding indicator lamp on the diffusor display (Fig. 158,3) lights up.
„
Use the temperature increase button (Fig. 157,6) or temperature reduction
button (Fig. 157,8) to set the required temperature.
„
Use the ventilation speed button (Fig. 157,9) to select the required ventila-
tion level.
Switching off:
„
Press the "ON/OFF" button (Fig. 157,7).
Z
Following switch-on the air conditioning unit needs approx. 3 minutes until
the compressor starts to run and cold air or hot air is output.
Z
Also read the manufacturer's instruction manual.
Fig. 157 Remote control
1 Symbol for automatic
2 Symbol for cooling
3 Symbol for heater
4 Temperature (set) display
5 Fan speed display
6 Temperature increase button
7 "ON/OFF" button
8 Temperature reduction button
9 Ventilation speed button
10 "Mode" button
11 Display
Fig. 158 Display on the diffusor
1 Mains connection indicator lamp
2 Temperature (current) display
3 Mode indicator lamp
Green: Cooling
Red: Heater
Z
If the air conditioning unit has run in heating mode, the blower will run on
for some minutes in order to dissipate the heat completely.