Burstner A 650, Инструкция по эксплуатации

Страница: 138 / 262

138
A-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN
Appliances
9
Adjustment menu The "MENU" button calls up the adjustment menu. The meanings of the indi-
vidual symbols are described in the following table.
The values can be increased or reduced via the "+" or "-" symbols.
Tool menus The various heater functions can be called up and adjusted via the tool menus.
The arrow symbols are used to change between the menus. The meanings of
the individual symbols are described in the manufacturer's instruction manual.
Selecting the operating
mode
The hot-water heater can be operated with the following energy sources:
z
Gas operation
z
230 V electrical operation
z
Gas and 230 V electrical operation
The operating mode is selected from the operating unit.
Selecting gas operation:
„
Press the "On" button next to the " " symbol. The gas operation is acti-
vated.
Selecting 230 V electrical
operation:
„
Press the "+" button next to the " " symbol until the desired heat output
is reached.
Selecting gas and 230 V
electrical operation:
„
Select gas operation and 230 V electrical operation on the operating unit.
Symbol Signification
This symbol appears when the circulating pump is activated
This symbol appears when a switching facility for gas cylinders
is activated
This symbol appears when a voltage of 230 V is present at the
heater
The internal temperature is displayed next to this symbol
The external temperature is displayed next to this symbol if an
external sensor is fitted
Symbol Signification
Set the desired temperature of +5 °C to +30 °C
Set the water temperature in the boiler
Set the heat output in electrical operation
Activate the function "Heating in gas operation"
Call up the enabling menu for the tool menus
Z
Select the output level during 230 V electrical operation in such a way that
it corresponds to the 230 V connection protection:
Level 1 (1050 W) at 6 A
Level 2 (2100 W) at 10 A
Level 3 (3150 W) at 16 A