Burley Surefire FCC 16, Инструкция для пользователя, установки и обслуживания

Страница: 11 / 32

Page 9
3.5.1. Coal Effect Layout
The fire is supplied with a set of ceramic fuel bed components as follows:
A three piece set of: lining boards, one left hand side, one right hand side and a rear board.
One Moulded Front Ceramic, Moulded Rear Ceramic, Moulded Coal Matrix, Coal with round
peg and one Coal with square peg.
Place the ceramic components as follows:
Hold the rear board in position and then place the left and right side boards in position with the
curved edges upwards and the black faces visible.
Position the rear burner ceramic in position behind the rear burner flange.
Place the front burner ceramic in its support in front of the burner. Manipulate the rear ceramic
so that the front ceramic slides in easily.
Place the moulded coal matrix on top of the rear ceramic so that the front rests on the front
ceramic.
Place the two pegged coals in position.
.
3.6. Glass Panel
The user is warned not to remove the glass panel or to disturb the fuel bed.
WARNING: If any cracks appear in the glass panel do not use the appliance until
the glass panel has been replaced by a qualified installer.