Burkert MS08, Руководство по эксплуатации

Страница: 76 / 84

Type MS08
Troubleshooting
76
16.1.1.3 Message Sensor error (internal error). Contact the service for your device
Product status symbol
Possible cause A sensor internal error occurred.
What to do?
Check the wiring.
Restart the sensor and the ME63 interface.
If the message is still there, send the sensor back to Bürkert.
16.1.1.4 Message büS event: producer not found
Product status symbol
Possible cause When you want to automatically freeze the values, the device that
can generate the binary event is not connected to büS.
What to do?
Make sure that the device that generate the binary event is con-
nected to büS.
Make sure that the connection between the binary event and the
product is set. Refer to chapter
Automatic freeze [
}
41] .
16.1.1.5 Message büS is not operational
Product status symbol
Possible cause Unknown cause
What to do?
Restart the product.
If the message is still displayed, send the product back to Bürk-
ert.
16.1.2 Messages [OUT OF SPECIFICATION]: out of specification
If the message displayed on your product is not explained in the Operating Instructions, contact Bürk-
ert.
16.1.2.1 Message Warning: Quality of measurement limited (SQI). Check sensor and process
Product status symbol
Possible cause The SQI (Sensor Quality Index) value is under the programmed
warning threshold level.
What to do?
Check the sensor.
Clean the sensor.
Check the process.