Burkert MS08, Руководство по эксплуатации

Страница: 67 / 84

Type MS08
General Settings - Maintenance
67
14 GENERAL SETTINGS - MAINTENANCE
Go to device SAC254 Sensor > function General settings > tab Maintenance .
Detailed view Maintenance
In these menus, the current values are displayed, not set.
Setting
Device information Displayed name Only displayed if a name was entered in the menu of
the same name for the Parameter detailed view.
Ident. number
Serial number
Firmware ident. number
Firmware version
büS version
Hardware version
Product type number
Manufacture date
EDS version
Device driver Driver version
Firmware group
DLL version
Origin
Reset device Restart
Reset to factory settings
Tab. 42: Settings in the “General settings” configuration area, maintenance detailed view
The menu items are detailed in the following chapters:
▪ Device information , refer to chapter Read device information [
}
67] .
▪ Reset device , refer to chapter Restart the product [
}
68] and Reset the product to its factory set-
tings [
}
68] .
14.1 Read device information
Go to device SAC254 Sensor > function General settings > tab Maintenance .
Select Device information . The menu shows only read-only values. Table Description of the device in-
formation parameters [
}
67] shows the values.
Parameter Description
Displayed name Entered name of the product. The name of the
product is shown on any display connected to the
fieldbus. See chapter
Enter a name for the product
[
}
53] .
Ident. number Product article number