Burkert MS08, Руководство по эксплуатации

Страница: 15 / 84

Type MS08
Product description
15
The colour of the product status indicator gives the following pieces of information:
▪ Whether product diagnostics are active or not. Diagnostics are active on the product and cannot be de-
activated.
▪ If product diagnostics are active, then the product status indicator shows whether diagnostics events
have been generated or not. If several diagnostics events have been generated, then the product status
indicator shows the diagnostics event with the highest priority.
Refer to table [
}
15]
If the product status indicator flashes, then the product is selected in a man-machine interface such as the
Bürkert Communicator software.
Colour
1
Colour code (for a
PLC) Diagnostics event
1
Red 5 Failure, error or fault
Due to a malfunction of the product or its periphery.
The functionality of the product is not guaranteed.
Orange 4 Check function
The product is being worked on:
▪ The product is searching for a büS participant.
▪ This status is exited after a few seconds.
▪ Product simulation active.
Yellow 3 Out of specification
The ambient conditions or process conditions for the product are outside the spe-
cified ranges.
Product internal diagnostics point to problems in the product or with the process
properties.
Data sheet values cannot be complied with.
Blue 2 Maintenance required
The product has detected a deviation during ongoing diagnostics and has imple-
mented a correction.
Do the required maintenance operation.
3 Product configuration cannot be managed
The updated product configuration cannot be saved.
It is not possible to transfer the configuration when swapping products.
Green 1 Diagnostics active
Product is in error-free operation.
Status changes are highlighted in colour.
Messages are sent via any fieldbus that may be connected.
1
according to NE 107