35
ONBOARD HELP
Built-in voice guidance on the RSI operates in either of two modes, terse or verbose. Verbose mode is designed to
help novice users navigate the various functions. The RSI confirms each command, speaks a context-sensitive help
prompt after each command, and prompts the user for a new command after a period of inactivity. Terse mode is
for advanced users who need minimal prompting. The RSI will confirm each command, and will only prompt for a
new command just prior to disconnecting.
The RSI operates in verbose mode by default. To switch to terse mode, dial 997. The RSI will remain in terse mode
for this and subsequent sessions, until a user dials 996 to switch back. In addition to the context-sensitive prompts
in verbose mode, any user can summon a complete list of available commands by entering 998. The RSI will read a
list of commands. You can interrupt the list with a new command at any time. The RSI will finish reading the
current phrase before executing the new command.
COMMAND TIMEOUTS
When the RSI expects input from the user, it will wait for a user-specified amount of time before disconnecting.
The default duration is 60 seconds. If you need more time to enter a command, enter 993. The amount of the time
extension is configurable using the AutoLoad Plus software.
DISCONNECTING
When you are done using the RSI, enter 999. This makes the line immediately available for new calls. If you hang
up without disconnecting, it may take 60 seconds or more for the RSI to release the phone line on its own,
depending on the duration of the command timeout setting.
