32
macro preset number (601-698) or choosing the macro from the menu (699) will generate a new macro status
update.
If a macro executes for a very brief duration, it is possible to issue a run command only to hear the RSI announce
the new status as “stopped.” This may happen when the macro completes its last line of code before the RSI
queries the new macro status.
Besides running and stopping macros, you can listen to a list of currently running macros by entering 600. The RSI
will read the names of macros that are stored on the selected unit and running at the moment you enter your
query. Macros that stop during the macro report will be reported as running.
AUDIO INPUT MONITORING
Line level audio applied to the rear panel RCA jack labelled
AUDIO IN may be monitored over the phone. This is commonly
used for monitoring program audio or room noise.
You may begin monitoring by following these steps:
1.
Log in to the RSI.
2.
Dial 994 to begin monitoring the audio input.
3.
Dial 995 to turn the audio off.
TIP:
To monitor multiple stations or points in
the audio chain, use an audio switcher
controlled by the ARC Plus.
Warning:
You may be able to issue commands while the audio
is playing, however, depending on the signal level, it
is possible for the audio input to overpower DTMF.
tones. The audio automatically turns off after 30
seconds.
