Bedienungsanleitung / User manual
VTC-8120WDH, VTC-8122WDHU
_________________________________________________________________________________
- 41 -
VTC-8122WDHU:
VTC-8122WDHU: RJ-45 system connector: Pins (front view of RJ-45 jack):
The camera is equipped with a RJ-45 system connector. Hence the following is possible:
remote power supply, UTP (twisted pair) of the video signal and OSD parameterising via RS-
485. The communication is done via the Pelco D protocol. The command to open/close and
to confirm the camera OSD is “PRESET 95”. Use the up/down/left/right commands of the
keyboard joystick to navigate through the OSD menu.
8 7 6 5 4 3 2 1
Pin:
1 Video
UTP
2 Video
UTP
3 RS-485
+
4
Power supply – or ~
5
Power or ~
6 RS-485
-
7
Power ~
8
Power supply - ~
N/A
GND
Motion out
(switch contact
output/shutter)
Voltage input
(12 V DC / 24 V AC)
BNC jack
(video signal)
Day/night out
(switch contact
output/shutter)
Day/night in
(switch contact
input)
RJ-45 system connector
(also see next page)
Power indicator (LED)
Joystick
UTP A/B
(twisted pair
output)
RS-485 A/B
G-Sensor out
+ - + -
