Bedienungsanleitung / User manual
VTC-8120WDH, VTC-8122WDHU
_________________________________________________________________________________
- 38 -
Setup page 2:
Further adjustments can be made by pressing onto the joystick.
Level calibrate:
Press the joystick to adjust the level calibration.
The electronic water level is an optical tool to assist the user to install the camera in a proper
horizontal position.
Adjust the camera properly. Once this is done, thus the LED lights up in blue, press the
joystick
down
to confirm.
Current min / max:
The camera is able to emit error messages (cf. page 35).
Move the joystick left/right to define as of which minimum/maximum current draw an error
message should be generated.
(The pre-defined values can be kept unchanged.)
Camera current:
Press the joystick to display the present current power consumption of the camera module in
the camera.
Setup page 1:
Return to the first page.
Exit:
Exit the OSD menu and save the adjustments.
Note:
If no adjustments are being made in the OSD for a couple of seconds, it will close
automatically.
If the LED is
blue
, the camera is positioned horizontally.
If the LED is
yellow
, the camera is tilted too far right.
If the LED is
red
, the camera is tilted too far left.
