Bedienungsanleitung / User manual
VTC-8120WDH, VTC-8122WDHU
_________________________________________________________________________________
- 36 -
2.3.6 Call-up the light menu
(only for VTC-8120WDH)
On the backside of the camera you will find a mini-joystick.
Press it
upwards
for approx. 5 seconds and the light will open. You may now adjust the
illuminated logo and side strip and the camera test parameters.
OSD adjustments are made by navigating with the mini-joystick.
Language:
By moving the mini-joystick left/right, you can switch between German and English.
Light:
You can define whether the side strip and the logo should be illuminated or not:
Transient: The illumination lights up only briefly (approx. 15 sec.) when the
camera is switched on.
Always: The illumination is always on.
Current min / max:
The camera is able to emit error messages.
Move the joystick left/right to define as of which minimum/maximum current draw an error
message should be generated.
(The pre-defined values can be kept unchanged.)
Camera current:
Press the joystick to display the present current power consumption of the camera module in
the camera.
Exit:
Exit the OSD menu and save the adjustments.
Note:
If no adjustments are being made in the OSD for a couple of seconds, it will close
automatically.
