Bullerjan B3 Keramik MAX, Инструкция по установке и эксплуатации

Страница: 15 / 47

14
English
Thank you for deciding to purchase a Bullerjan ® stove
B³ Keramik or B³ Keramik MAX. You have chosen a stove of
the highest quality with cutting-edge incineration
technology and very high heating efficiency.
Please register your product at our website, you can
thereby extend the warranty to 5 years (cg. warranty terms
on www.bullerjan.com).
Before you begin operation of the Bullerjan Free Flow, we would
like to give you some important information first and foremost:
Please note the following:
Carefully read this manual before initial use. It
includes important information for the installation,
operation and secure use of your Bullerjan ®
B³ Keramik or B³ Keramik MAX. If you still have
questions, please contact your specialised retailer
or the Bullerjan GmbH directly.
Before installing your stove, ensure that the load
carrying capacity of the installation location is
sufficient for the weight of the stove including the
base and combustion wood.
If necessary, there must be weight adjustment
using a shim.
The Bullerjan GmbH points out that it is not
permitted to burn waste, combustible fluids or
non-suitable fuels to heat the stove.
The Bullerjan stoves B³ Keramik and B³ Keramik
MAX are intermittent burning appliances. This
means as per definition according to EN 13240:
An intermittent burning appliance is a heat source
which is not beeing used for permanent operation.
Note: venting devices or facilities that are
operated together with burning appliances in the
same room can cause problems with the
operation of the stove. Please ask your chimney
sweep.
Before beginning operation on your stove, please
note the national and European standards as well
as the valid, local regulations of your region. Ask
your chimney sweep who provides this
information.
Bullerjan
®
stoves B³ Keramik and B³ Keramik
MAX are coated with high-quality, heat-resistant
paint. This paint only hardens completely during
the initial heating of the stove.
Bullerjan GmbH points out that no waste etc.,
flammable liquids or unsuitable fuels may be used
to heat the fireplace. For a listing of the usable
fuels please refer to the further information in this
manual.
As a result, during the initial heating of the stove,
there will be some smoke formation and odour.
Therefore, when initially heating, open the doors
and windows.
Firing installations require a regular inspection by
a specialist. This is your professional chimney
sweep or your Bullerjan ® specialised retailer.