23
PANEL PRO
Plan to replace the coolant and clean tank every 3- 6 months.
COOLANT FILTER:
The routing process produces a large quantity of metal chips. Most of the chips will
stay in the pan, The screen on top of the coolant pail will catch what drains through.
Simulate the file before cutting.
The process of simulation does all the work of joining the dxf file entities into the correct
order and direction as well as computing tool paths.
Open the file.
Select the layers to cut.
Select the operating mode (auto tool path for normal cutting)
Open the cut dialog, (blue icon on tool bar with a C in the middle), click nearest cutting
order, move the sim delay to .001, click simulate. The joining and sorting is done and
then the actual tool path is simulated. If a finish cut is specified, a red path indicates
the rough cut and the blue path indicates the final or finish cut.
Cut the file
Ready?? Click cut the file. The router turns on, proceeds to the starting point, lowers to
the cutting position and commences cutting. No further intervention is required. Assure
that coolant is flowing. (Adjust the spindle delay time in move options to allow time for
the spindle to come up to speed and the coolant to reach the top.) When routing is
complete, the router will raise and power will be removed from the router and the
coolant pump.
When cutting is completed, clean the machine. Wipe down the steel parts with a dry
rag and spray with a light coat of LPS2. Spray LPS2 liberally under and around the
linear bearings. Remove the collet and end mill. Clean out any chips and spray collet
and collet bore with LPS2.
SC3 Control Unit
PWR:
turns AC power on and off. It also acts as an emergency off. In the off position,
it removes all AC power from the internal components. If the spindle is running, or the x
or y axis is moving, everything will stop in the off position and will not automatically
restart when turned back on. The light in the PWR rocker switch is lighted when the
internal components are receiving AC power.
