manualshive.com logo in svg

Bull NovaScale 3005 Series, Инструкция по установке и эксплуатации, Страница: 15 / 158

Поделиться
Скачать
Bull NovaScale 3005 Series Скачать руководство пользователя страница 15

 

 xiii 

FCC Declaration of Conformity 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) this device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that may cause undesired 

operation. 

This product is in conformity with the protection requirements of the following standards: 

Electrical Compatibility: 

- UL 60950 

- CSA 60950 

Canadian Compliance Statement (Industry Canada) 

This Class A digital apparatus meets all requirements of the Canadian Interference Causing 

Equipment Regulations. 

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. 

This product is in conformity with the protection requirements of the following standards: 

Laser Compliance Notice 

This product that uses laser technology complies with Class 1 laser requirements. 

A CLASS 1 LASER PRODUCT label is located on the laser device. 

 

• 

Class 1 Laser Product 

• 

Luokan 1 Laserlaite 

• 

Klasse 1 Laser Apparat 

• 

Laser Klasse 1 

 

Содержание NovaScale 3005 Series































































































































































Отзывы:

Нет отзывов