Bull Escala PL 1650R-L+, Информация о оборудовании

Страница: 39 / 90

Tip: If pressing the power button does not start the system, use the following instructions to start the system
using the Advanced System Management Interface (ASMI).
Set up access to the ASMI. For instructions, see Accessing the ASMI . •
Start the system using the ASMI. For instructions, see Powering the system on and off . •
Parent topic: Start the system or logical partition
Start the system or logical partition using the Hardware Management
Console
After the required cables are installed and the power cables are connected to a power source, you can use
the Hardware Management Console (HMC) user interface to start the system or logical partition.
For instructions on working with the HMC, see Managing the Hardware Management Console . For
instructions on starting a logical partition, see Activating a partition profile . For instructions on starting the
system, see Powering on the managed system .
Progress indicators, also referred to as checkpoints, appear on the control panel display while the system is
being started. The power-on light on the control panel stops blinking and remains on, indicating that system
power is on.
Parent topic: Start the system or logical partition
Stop the system or logical partition
Learn how to stop a system or logical partition.
Attention: Using either the power-on button on the control panel or entering commands at the Hardware
Management Console (HMC) to stop the system can cause unpredictable results in the data files. Also, the
next time you start the system, it might take longer if all applications are not ended before stopping the
system.
To stop the system or logical partition, select the appropriate procedure:
Stop the system that is not managed by a Hardware Management Console •
Stop the system or logical partition using the Hardware Management Console •
Parent topic: Start or stop the system or logical partition
Related tasks
Control panel
Start the system or logical partition 33