manualshive.com logo in svg

Bull Escala PL 1650R-L+, Информация о оборудовании

Поделиться
Скачать
Bull Escala PL 1650R-L+ Скачать руководство пользователя страница 25

If you replaced the control panel as part of another procedure, return to that procedure now. If you
replaced it because it was not operational, verify that the new resource is functional. See 

Verify the

installed part

.

11. 

Parent topic:

Model ESCALA PL 850R/PL 1650R/R+ and ESCALA PL 1650R-L+ control panel

Remove the control panel with power off

These procedures describe the removal of the control panel with power off in the model ESCALA PL 850R/PL
1650R/R+ or ESCALA PL 1650R-L+.

If your system is managed by the Hardware Management Console (HMC), use the HMC to complete the
steps for removing a control panel. For instructions, see 

Remove a part using the Hardware Management

Console

.

To remove the control panel with the power off, do the following:

Perform the prerequisite tasks described in 

Before you begin

.

1. 

Stop the system (see 

Stop the system or logical partition

).

2. 

Disconnect the power source from the system by unplugging the system.

Note:

 This system might be equipped with a second power supply. Before continuing with this

procedure, ensure that the power source to the system has been completely disconnected.

(L003)

or

3. 

Remove the front cover from your system. Refer to 

Remove the front cover from the model ESCALA

PL 1650R-L+ or ESCALA PL 850R/PL 1650R/R+

.

4. 

Remove the control panel by pressing the locking tabs A located on either side of the panel, grasping
the edges of the panel, and pulling it out of its bay.

Figure 1. Control panel removal

5. 

Control panel

Remove the control panel with power off

19

Содержание Escala PL 1650R-L+



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды