manualshive.com logo in svg

Bull Escala PL 1650R-L+, Информация о оборудовании

Поделиться
Скачать
Bull Escala PL 1650R-L+ Скачать руководство пользователя страница 66

Place the model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+ __in the service position

Learn how to place the unit into the service position.

• 

Place the model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+ __in the operating position

Learn how to place the unit into the operating position.

• 

Gain access to the model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+ control panels

• 

Parent topic:

Related procedures

Install the front cover on the model ESCALA PL 250R-L, PL 250R-L+ or
PL 450R-VL+ or 7/10

To install the front cover, follow these steps:

If necessary, open the front rack door.

1. 

Insert the two tabs A located on the bottom edge of the cover into their locking slots, located on the
system unit frame as shown in the following figure.

2. 

Pivot the front cover up toward the top of the system unit frame.

3. 

Align the tabs to the matching slots located on the front of the system unit frame.

4. 

Gently push the tabs into the slots until the cover seats against the front of the system unit.

5. 

Close the front rack door.

6. 

Parent topic:

Remove the front cover from the model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+

Place the model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+ or
7/10 in the service position

Learn how to place the unit into the service position.

Note:

 Some of the figures in these procedures might not look exactly like the system unit that you have.

However, the steps to perform the task are the same.

DANGERWhen working on or around the system, observe the following precautions:

Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a
shock hazard:

Control panel

60

Install the front cover on the model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+ or 7/10

Содержание Escala PL 1650R-L+



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды