Bull Escala PL 1650R-L+, Информация о оборудовании

Страница: 37 / 90

unstable if you pull out more than one drawer at a time.
(For fixed drawers.) This drawer is a fixed drawer and must not be moved for servicing unless
specified by the manufacturer. Attempting to move the drawer partially or completely out of the rack
might cause the rack to become unstable or cause the drawer to fall out of the rack.
•
(R001)
Before you begin a replacement or installation procedure, perform these tasks:
If you are installing a new feature, ensure that you have the software required to support the new
feature and determine if there are any existing PTF prerequisites. 1.
If you are performing an installation or replacement procedure that might put your data at risk, ensure,
wherever possible, that you have a current backup of your system or logical partition (including
operating systems, licensed programs, and data).
For information on backing up your system or logical partition, select from the following:
AIX backup ♦
Linux backup ♦
2.
Review the installation or replacement procedure for the feature or part. 3.
Note the significance of color on your system.
Blue or terra-cotta on a part of the hardware indicates a touch point where you can grip the hardware
to remove it from or install it in the system, open or close a latch, and so on. Terra-cotta might also
indicate that the part can be removed and replaced with the system or logical partition power on.
4.
Ensure that you have access to a medium, flat-blade screwdriver. 5.
If parts are incorrect, missing, or visibly damaged, do the following:
If you are replacing a part, contact your service provider or next level of support. ♦
If you are installing a feature, contact one of the following:
Your service provider or next level of support. ◊
♦
6.
If you encounter difficulties during the installation, contact your service provider, or your next level of
support. 7.
If you are installing new hardware in a logical partition, you need to understand and plan for the
implications of partitioning your system. For information, see
Partitioning the server , and then return to
these instructions.
8.
Parent topic: Related procedures
Start or stop the system or logical partition
Learn how to start or stop a system or logical partition.
Start the system or logical partition
Use these instructions to start a system or logical partition.
•
Stop the system or logical partition
Learn how to stop a system or logical partition.
•
Parent topic: Related procedures
Start the system or logical partition
Use these instructions to start a system or logical partition.
Start a system that is not managed by a Hardware Management Console •
Start the system or logical partition using the Hardware Management Console •
Control panel
Start or stop the system or logical partition 31