Using your LinkStation
LinkStation User Manual
73
RAID Scanning
In RAID 1, LS-WXL and LS-WSXL LinkStations support RAID scanning. A RAID scan tests the RAID
array for read performance. If defective sectors are found, they are repaired automatically. If your
multiple-drive LinkStation is in RAID 1 mode, you should run RAID scans regularly. Configure regular
RAID scans as follows:
1
2
Note: Check [Shutdown] to automatically shut down the LinkStation whenever a RAID error
occurs. Check [Begin Immediate RAID Scan] to initiate an immediate RAID scan.
To stop a RAID scan, click [Abort RAID Scanning].
Single-drive LinkStations do not support RAID arrays or RAID scanning.
RAID Scanning is now configured.
Choose [Enable], enter your desired schedule, and
click [Save].
Navigate to [System] - [Storage] - [RAID Scanning]
in the Web Admin interface. Under [RAID Scan-
ning], click [Modify Settings].