LinkStation User Manual
165
Appendix
Info/Error LED
The Info/Error LED blinks orange when it has a message.
The message is coded by the pattern of blinking.
Note: – The messages are also available (uncoded) in NAS Navigator2.
Information code
Message contents
I11
Many defective sectors have been found.
I13
The RAID array is being formatted.
I14
The RAID array is being checked.
I15
The error status of the RAID array is being investigated.
Data transfers will be slower than usual until this is complete.
I16
The RAID array is being created.
I17
The RAID array is being resynchronized.
Data transfers will be slower than usual until this is complete.
I18
The RAID array is being reconfigured.
Data transfers will be slower than usual until this is complete.
I19
The RAID array is being erased.
I23
Initializing the system settings
I25
Updating the firmware
I27
Checking a USB drive
I28
Formatting a USB hard drive
Place
Status
10’s place
The LED illuminates for 1 second every 0.3 seconds.
The number of flashes is the ten’s place of the information code.
1’s place
The LED illuminates for 0.5 seconds every 0.3 seconds.
The number of flashes is the one’s place of the information code.