Boiler Assembly
6
20
We reserve the right to make any changes due to technical modifications!
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
6.8
Boiler Jacket - Pack C
J
NOTICE!
The rear wall consists of seven parts (Fig. 26).
z
Secure the rear wall section (Fig. 26,
Item.
1) with
two self-tapping screws per side (left and right) on the
side wall edges.
z
Secure the small central rear wall section (Fig. 26,
Item.
6) on the lower rear wall section (edge pointing
inwards) using two self-tapping screws (Fig. 26,
Item.
1).
z
Locate the central rear wall section (Fig. 26,
Item.
2)
with the Z-profile behind the lower rear wall section
on the edge of the side wall and secure on the left
and right side with two self-tapping screws each.
z
Insert the upper rear wall section (Fig. 26,
Item.
3)
with Z-profile behind the central rear wall section on
the edge of the side wall, and secure on the left and
right side with two self-tapping screws each.
z
Hook the upper small rear wall section (Fig. 26,
Item.
4) with the bracket into the upper rear wall
section, and secure with a self-tapping screw.
z
Secure one or two cable clips (Fig. 26,
Item.
5) or a
cable duct on the upper rear wall section.
z
Secure the left and right locking plate (Fig. 26,
Item.
7) on the side wall using two self-tapping
screws respectively.
Fig. 26
installation of the rear wall section
Item. 1:
Lower rear wall section
Item. 2:
Central rear wall section
Item. 3:
Upper rear wall section
Item. 4:
Upper small rear wall section
Item. 5:
Cable clip
Item. 6:
Central small rear wall section
Item. 7:
Left and right locking plate
7
1
2
3
4
6
5
