Boiler Assembly
6
10
We reserve the right to make any changes due to technical modifications!
Boiler Installation and Maintenance Manual SB735 • Issue 10/2003
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
z
Overlap the insulation blankets on the side and wrap
around the boiler body, then fasten with 8 clips.
z
Unscrew four hexagon bolts (Fig. 6,
Item.
1) from the
right side of the boiler door (Fig. 7,
Item.
1) and four
from the left side.
A
DANGER OF INJURY!
through falling parts.
Ensure that the hinge bolts (Fig. 21,
Item.
1)
are in the boiler door before opening it.
J
NOTICE!
The recesses (Fig. 6,
Item.
2) in the boiler door
(2 on the left and 2 on the right side) have been
provided for lifting with a crane or hoist, for
example for the complete removal of the door.
z
Open the burner door (Fig. 7,
Item.
1)
z
Place the insulation blanket with round cut-out
(Fig. 7,
Item.
2), with its wide edge facing upwards,
on the left front of the boiler body (wide edge up) and
secure with four clips (2 left, 2 right) on the
surrounding thermal insulation.
A
CAUTION!
Ensure that the wide edge is at the top at the
hinge bolts!
z
Close the burner door and re-secure with eight
hexagon bolts.
z
Position the thermal insulation strip (Fig. 7,
Item.
3)
laminated on the front of the reversing door.
z
Position the thermal insulation strips (Fig. 7,
Item.
4)
for the reversing door from below around the side of
the reversing door and secure with two clips.
J
NOTICE!
Observe the hinge bolt cut-outs!
z
Locate the rear side thermal insulation (Fig. 8,
Item.
2) in accordance with the cut-outs on the rear
side of the boiler and secure with six clips (Fig. 8,
Item.
1, 3 left and 3 right) on the surrounding thermal
insulation (Fig. 8,
Item.
3).
Fig. 6
Screws for opening the burner door
Fig. 7
Burner door insulation blanket
Fig. 8
Rear side insulation blanket
1
1
2
2
1
2
3
4
5
1
2
3
