Buderus Logano plus GB312, Инструкция по установке и обслуживанию

Страница: 39 / 96

7
Placing the heating system in operation
Logano plus GB312 – 6 720 806 273 (2013/01) 39
7.20 Commissioning report
▶ Initial and date the commissioning steps carried out.
Commissioning steps Page Readings taken Remarks
1. Fill heating system and check for leaks
– Heating system filling pressure __________________ psi
2. Details in "Water quality requirements for Logano plus GB312"
manual taken into account
– Concentration of any additives Add.:______________ Conc.:__________%
3. Record gas characteristics: calorific value 42 __________________ BTU/ft³
4. Check gas pipe for leaks 42
Bleeding the gas supply pipe 51
5. Bring the system up to operating pressure 41
6. Check air intake and outlet openings and flue connector 43
7. Checking the air inlet diaphragm 43
8. Checking appliance equipment 42
9. Starting up the control panel and the burner 44
10. Adjust burner setting if necessary 45
11. Record readings taken 48 Maximum load Minimum load
Pressure differential ____________in W.C. ____________in W.C.
Flue gas temperature ________________ °F ________________ °F
Air temperature ________________ °F ________________ °F
Carbon dioxide level (CO
2
)or oxygen content (O
2
) ________________ % ________________ %
Carbon monoxide content (CO), free of air _____ ppm _____ ppm
12. Measuing the gas supply pressure 53 ____________in W.C.
13. Checking for leaks during operation 53
14. Function testing 52
Testing ionization current ____________ μA
15. Installing jacket panels 54
16. Inform operator and hand over technical documentation 54
17. Correct commissioning confirmed by installer
Signature:___________________________________________________
18. Signature of operator
Signature:___________________________________________________
Table 18 Commissioning report