13
System inspection and maintenance
Logano G615 - Subject to technical modifications
52
13.7
Inspection and maintenance logs
The inspection and maintenance logs provide an overview of the required inspection and maintenance work.
B
Initial and date the inspection operations completed.
The inspection and maintenance logs can also be used as templates.
Inspection work
Page
Date:____________
Date:____________
1.
Check general condition of heating system
2.
Visual inspection and function check of the heating
system
3.
Check fuel and water-carrying components of the system
for:
• Leaks during operation
• Visible signs of corrosion
• Signs of aging
4.
Check the combustion chamber and heating surfaces for
contamination. Shut down the heating system first.
Æ
48
5.
Check the burner (
Æ
burner documentation)
6.
Check the flue gas and venting system for proper
operation and safety (see
Æ
burner documentation)
7.
Check the operating pressure and inlet pressure of the
diaphragm expansion vessel for heating systems
Æ
51
8.
Check the function of indirect-fired water heater tank and
anode rod (
Æ
tank documentation)
9.
Check the control panel setting (see
Æ
control panel
documentation)
10.
Record the final checks of the inspection work, incl.
measurements and test results
Confirm professional inspection
Company stamp/
signature
Company stamp/
signature
Tab. 15 Inspection log
If during inspection work conditions are identified that require additional service and maintenance, perform
this work on an as-needed basis. If make-up water is added, the quality of this water must correspond to the
specifications in the enclosed operating manual.
