Additional programming options
8
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
58
z
Select a heating zone (
Æ
Chapter 7.6).
Example: Heating zone 2
z
Select the standard program for the chosen heating zone (
Æ
Chapter 7.10).
(here: "daytime program")
The first set point (start point): "Monday at 06:00am" (06:00) at "70°F" (21°C) will
be displayed.
Turn the dial to the stop point of the first heating phase you want to connect with
another (here: "01:00pm" (13:00)).
The display shows the stop point to be connected.
Hold down "Time" and turn the dial clockwise, until the start point of the second
heating phase, i.e. the next consecutive heating phase, is displayed, which you
wish to combine with the first heating phase (here: "05:00pm" (17:00)).
If you have selected the start point of the next consecutive heating phase, the
bottom line will show eight blocks, which are deleted in one-second intervals
from left to right. When no blocks are left both heating phases have been
combined.
The deleting process will be terminated if you release the "Time" button
prematurely or turn the dial back. In this case all set points for the heating phase
remain active.
Release "Time" to save your input.
The new program that has been modified by the connection process is saved
under "custom program" and the heating zone number (here: "2").
You can call up your new program by pressing "PROG" and turning the dial
(
Æ
Chapter 7.10).
Press "Back" to return to the permanent display.
daytime program
70°F
at 06:00am
Monday
daytime program
Monday
63°F
at 01:00pm
+
data point
connecting
custom program 2
63°F
at 10:00pm
Monday
