Extended functions
7
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
33
7.8
Heating zones with MEC2 remote control
During installation, your heating contractor will determine which heating zones
are to be controlled by the MEC2 remote control. These heating zones are "MEC
heatingzones".
MEC heating zones
The following adjustments made at the MEC2 apply all to "MEC heatingzones"
simultaneously:
–
Set the room temperature
–
Set the warm weather shut down (WWSD) temperature
–
Select operating mode
–
Set the vacation function
–
Set the party or pause function
If you have selected an individual heating zone that is assigned to the MEC2,
and you want to make one of the above adjustments, the fault message
"selection not supported MEC heatingzones select" will appear.
Select "MEC heatingzones" to program these settings (
Æ
Chapter 7.6).
Individual heating zones
The following adjustments can only be implemented for each individual heating
zone separately:
–
Select the standard program
–
Change the standard program by moving set points
–
Insert or delete set points
–
Delete or connect heating phases
–
Create a heating, DHW or recirculation pump program
If you have selected "MEC heatingzones", and you want to make one of the
above adjustments, the fault message "timer not supported primary zone select"
will appear.
Enter these settings for each heating zone separately (
Æ
Chapter 7.6).
selection
select
MEC heatingzones
not supported
timer
select
primary zone
not supported
