Extended functions
7
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
31
7.7
Adjusting the room temperature for another heating zone
Your heating system may be equipped with several heating zones. If you want
to change the room temperature for a different heating zone than the one last
selected, first select the desired heating zone.
Depending on the equipment level of your heating system, the following heating
zones can be selected:
–
MEC2 heating zones (all heating zones assigned to the MEC2,
Æ
Chapter 7.8)
–
Heating zone 1 – 8
If several heating zones are assigned to the MEC2, the temperature for these
heating zones can only be adjusted for all. Otherwise a fault message "selection
not supported MEC heatingzones select" will appear. In such cases select "MEC
heatingzones".
z
Open flap.
Hold down "Heating zone" and select the desired heating zone with the dial
(here: "heating zone 2").
Release the "Heating zone" button. The displayed heating zone is now selected.
As soon as the heating zone has been selected, the display returns to the
permanent display.
AUT
+
select heat zone
heating zone 2
room temp
outdoor temp
32°F
67°F
