Buderus Logamatic 4321 Скачать руководство пользователя страница 39

Страница: 39 / 80

Extended functions

Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.

Hold down "Time", and select the desired time with the dial. Example: "06:30am"
(06:30).

Release "Time". The newly adjusted time for the "ON" set point is now saved.

The modified set point will be saved under the "custom" program and the
number of the heating zone (here "2").

Continue to turn the dial until the next set point that you want to change is
displayed.

The "OFF" set point for Monday appears. Now you can modify the time for the
"OFF" set point.

Hold down "Time", and select the desired time with the dial. Example:
"11:00pm" (23:00).

Release "Time". The newly-adjusted time for the "OFF" set point is saved.

Next set point

Continue to turn the dial until the next set point is displayed.

The next set point (Tuesday, 5:30 am (05:30 h)) appears.

Also change the following set points to 6:30 am (06:30 h) and

11:00 pm (23:00 h). The system will now heat from 6:30 am to 11:00 pm (06:30 h
to 23:00 h) Monday to Thursday.

Press "Back" to return to the permanent display.

The modified standard program is saved under "custom" and the number of the
heating zone.

custom program 2

Monday

70°F

at 06:30am

USER NOTE

You can change the weekday if you press "Weekday" instead of "Time".

You can change the switching state ("ON"/"OFF") by pressing "Display"
instead of "Weekday" or "Time". The operating mode determines the switching
state: "ON" = day mode; "OFF" = night mode.

Ensure that a stop point is associated with every start point.

Содержание Logamatic 4321

















































































Результаты поиска

Содержание Logamatic 4321

Отзывы:

Похожие инструкции для Logamatic 4321

Бренды по названию

Популярные бренды

Buderus Logamatic 4321, Руководство по эксплуатации

Результаты поиска

Содержание Logamatic 4321

Отзывы:

Похожие инструкции для Logamatic 4321

Бренды по названию

Популярные бренды