Controls and MEC2 remote control
5
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
14
5.2
MEC2 remote control
The MEC2 remote control is the central element used to
operate the Logamatic 4321/4322 control panel.
Display
The display (
Æ
Fig 6, [4]) indicates functions and
operating values, e.g. the actual room temperature.
Dial
The dial (
Æ
Fig 6, [5]) is used to set new values and
scroll through the menus.
Buttons
You control the functions via the buttons, and the
relevant indications appear on the display. To change a
value, push and hold the button, then turn the dial.
When the button is released, the new value is
implemented and saved.
You can reach certain functions, such as day room
temperature, night room temperature, and possibly the
DHW temperature or the automatic heating mode,
directly via the corresponding buttons (
Æ
Fig 6, [1] to [3]
and [6]).
Behind a flap (
Æ
Fig 6, [7]) additional buttons are
available for further settings, e.g. for entering weekdays
or setting the time.
The unit automatically returns to the standard display if
no entry is detected for some time.
Fig. 6
MEC2 remote control
1
Continuously reduced heating mode
2
Automatic heating mode by timer
3
Continuous heating mode
4
Display
5
Dial
6
Input DHW temperature/reloading
7
Flap for the keypad of control level 2
6 720 618 326-06.1RS
1
2
3
6
4
5
7
