Buchi Sepiatec SFC-250, Руководство по эксплуатации

Страница: 31 / 62

Büchi Labortechnik AG
Software | 6
Operation Manual Sepiatec SFC-250 31/62
No. Name Description
4 Flow Flow rate in ml/min.
5 Modifier Modifier concentration in percentage.
6 Add-On Flow Flow rate in ml/min of the Add-On pump
7 Use Add-On Determines if the third pump is used as Add-
On pump (On) or works together with the
modifier pump (Off).
8 Use GLS tandem mode Combines two GLS for higher flow rates
9 Wavelength Wavelength at which detection takes place in
nm.
10 ELSD Gain Number of ELSD gain.
11 Injection Injection volume in ml.
12 No. of Injections Number of injections to be carried out one af-
ter the other.
13 Modifier Selection of pump inlet at the modifier pump.
6.4.1 Setting new methods
Navigation path:
➔
PARAMETER
u
Tap the [METHOD NAME] button.
ð The display shows a dialog with an
alphanumeric input box.
u
Enter the value.
u
Tap the [OK] button to confirm.
ð
The value is saved.
ð The dialog box closes.
u
Tap the COLUMN [...] button to enter a column
designation.
ð A new window opens to choose a column
from a list or add a new one.
u
Tap the appropriate [A] , [B] , [C] , [D] button to
select the solvent connection.
u
Tap the MODIFIER [...] button to enter solvent
designation.
ð A new window opens to choose a solvent
from a list or add a new one.
u
Set the parameters on the left part of the
window.
Optional detector
u
Tap the WAVELENGTH [...] button to set the
number of wavelengths.