6 | Software
Büchi Labortechnik AG
48/62
Operation Manual Sepiatec SFC-250
No.
Name
Description
4
Parameter table
To see several parameters about the recycling
module.
5
[Switch Temperature OFF]
button
To switch off all temperature controllers.
6
[Piston Flush 10 sec]
button To flush the piston for 10s.
7
[Detector Calibration]
button To manually start the calibration of the UV
detector.
8
[Lamp ON]
button
To switch on the lamp.
9
[Lamp OFF]
button
To switch off the lamp.
10
[Syringe Exchange]
button
To move the syringe pump into a position
that allows the exchange of the glass syringe.
11
[Inject Valve to Inject]
but-
ton
To switch the injection valve into the manual
position.
12
[Inject Valve to Load]
button To switch the injection valve into the load po-
sition.
13
[Expansion Valve to Inject]
button
To switch the expansion valve into the injec-
tion mode.
14
[Expansion Valve to Expand]
button
To switch the expansion valve into the expan-
sion mode.
15
[Stop Flush Fraction immedi-
ately]
button
This button cancels the fractionation cycles of
all 10 GLS channels.
16
[Manual Flush Fractions]
button
This button starts the fractionation cycle of a
GLS channel that can be selected in a new
window.
17
[Flush condensate]
button
This button simulates a liquid detection in the
first cylinder, so that any residue condensate
is flushed out.
18
[Close all Fraction Valves]
button
This button closes all fractional valves for a
service on the recycling module.
19
Software Version
Displays the current software version.
