btsr IS3W/MTC, Руководство по эксплуатации

Страница: 6 / 89

Introduction
- I.2 - SMART 200 MTC
Within the Appendix A “Quick Reference” the push-buttons of SMART control
panel are shown as follows:
Meaning of the Capital/Small Letters on Display
Within the functions that provide two programmable alternative options, i.e.:
Normally Open or Normally Closed Contact
Enabled/Disabled Condition ( on/off )
Pulse/Continuous Signaling, etc.
The letters shown on display as
CAPITAL letters indicate the currently active
choice, while the small letters refer to the possible alternative choice.
Example:
Item Function Current Programming
RES-Ma Ma= reset-Manual
RES-mA
Counter reset mode: Automatic (mA)
or Manual (Ma)
mA= reset Auto
STP-Cp Cp = continuous signal
STP-cP
STOP output programmable as
continuous signal
(CONT) , pulse
signal 2 seconds (P2s) or pulse
signal 10 seconds (P10s)
cP = pulse signal
ST-NCo NCo = normally closed
ST-NcO
Stop Output programmable as
Normally Closed
(NC) or Normally
Open (NO) contact
NcO = normally open
Alternative items:
Within the description of configuration/programming procedures the alternative
screen shots are shown with this bracket symbol.