btsr IS3W/MTC, Руководство по эксплуатации

Страница: 34 / 89

Operation
- 3.20 - SMART 200 MTC
Setting the same value for all the sensors
If you chose to set the same LDRUM value for all the sensors, the “
DEV: XX
AAAAmm” or “
D: XX L AAAAmm” screen will re-appear.
In this case, press to continue.
Setting the same value just for a given interval of sensors.
If, on the contrary, you chose to set the same value only for a range of sensors, the
screen shown to the left will appear.
xxx number of the first sensor (
set during the previous step )
yyy number of the last sensor for which you want to set the same LDRUM value.
increases the value of yyy field
Once you have set the desired range, press to continue.
The “
DEV: XX AAAAmm” or
“D: XX L AAAAmm” screen will re-appear.
Repeat the previous operation if you want to choose a new LDRUM value and a
new interval of sensors, until all the sensors will be assigned a LDRUM value.
At the end, press to continue.
Saving the LDRUM values into the sensor’s memory
This screen asks you to confirm the set values.
Press to confirm
Press to leave the function without saving.
This screen, shown for a few seconds, indicates that the previously set value are
being transferred into the sensors’ memory.
At this point, the LDRUM CONFIG screen will re-appear.