btsr IS3W/MTC, Руководство по эксплуатации

Страница: 59 / 89

Operation
SMART 200 MTC -3.45 -
+ ( hold down ) Fast increment
+ ( hold down ) Fast decrement
Confirms the set value
Clears the set value, restores the previous value and returns to
>DCOUNT screen
Once you have setup the desired value, press to select the next parameter
( DSTART)
DSTART Creating a New Article
Minimum Image Variation Frequency
SETUP NEW
DSTART
This function allows you to set the minimum variation frequency above which the
sensor indicates a stroke detection.
The sensor, through a wrap around buffer covering a time interval of 5ms,
constantly check that within the last 5ms the number of image variations occurred
is at least equal to the value set through the DSTART parameter.
It can be programmed with a value ranging between 01 (minimum frequency) and
10 (maximum frequency).
Once you have selected the DSTART function from NEW menu, press to
have access to the function.
Set the desired value using , and .
Increment by 1
Decrement by 1
Confirms the set value
Clear the set value, restores the previous value and returns to
>DSTART screen
Once you have setup the desired value, press to select next parameter
( DSTOP)
B
5