btsr IS3W/MTC, Руководство по эксплуатации

Страница: 5 / 89

Introduction
SMART 200 MTC - I.1 -
INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION
Congratulations for choosing a BTSR product.
With our SMART 200 MTC yarn measurement and control system, you got an
innovative, unique solution, allowing you to obtain an accurate measurement of
yarn meters wound on doubling machines, winding machines, etc. This system also
offers the possibility to control the yarn breakage/missing conditions
(“BK on/off function”).
The measurement and failure detection task is performed by BTSR IS3W/MTC
Sensors.
How to Use This Manual
This Operation Manual is divided into 4 Chapters and 1 Appendix.
Chapter 1 – Overview describes the main features, components and the principle of
system operation.
Chapter 2 – Technical Data and Installation gives the necessary instructions to
correctly install the system.
Chapter 3 – Operation gives a detailed description of the operations needed to
setup and program the system according to the application needs.
Chapter 4 – Troubleshooting and Maintenance provides a quick guide to solving
the main technical faults of the system.
Appendix A – Quick reference summarizes the sequence of operations that staff
who have had sufficient experience in handling the system, have to carry out in
order to setup and program the system.
Symbols used
Highlights notes, warnings and points to which the attention of the reader
should be directed.
Indicates a particularly sensitive situation which could have an effect
on the safety or proper operation of the system.
IS3W.. The sensors used by SMART 200 MTC system are IS3W/MTC sensors.
Within this manual they will be simply called IS3W..
While scrolling through features that can be activated from the SETUP,
WORK, CONTROL and NEW menus, this symbol indicates the procedure
that describes the specific feature. The same symbol is shown at the
beginning of the page, which describes in details the function itself.
Within the operating procedures section, this symbol indicates that, to
activate the desired function you must press and hold down for 3 seconds
the button.