register
regi_star_MA_Kap_1_en
Rev. 1.2.1 - 08/2014
1
1
General Assembly Instructions
1.1 Structure of the Assembly Manual
The present assembly manual is subdivided into four chapters:
•
Chapter 1
: This chapter contains general advice and requirements
regarding the assembly of
BST eltromat
systems. Moreover, the
structure of safety instructions will be explained.
•
Chapter 2
: This chapter gives an overview of the system components.
Moreover, this chapter lists all safety instructions, which indicate
possible dangers.
•
Chapter 3
: This chapter describes the assembly process. In addition,
the chapter contains cross-references to other assembly instructions
of other manufacturers, whose products are part of the described
BST eltromat
system.
•
Chapter 4
: This chapter describes the integration of the
BST eltromat
system into a network (required for remote service and other network
functions).
1.2 General Instructions
The present assembly manual describes the operating routines for the
safe and proper installation and commissioning / start-up of the system.
For this purpose, adhere to the step-by-step operating sequence.
• Reading this assembly manual attentively is indispensable for effec-
tive and fault free assembly of this system.
• Ensure that this assembly manual is available to all persons assem-
bling this system. Observe all relevant information and instructions.
• Ensure that this assembly manual is always complete and in a
perfectly legible condition.
• Only operate the system when in a perfect condition.This system is
designed as a unit to be fitted to a complete machine line. Do not
start up this machine within CENELEC member states until the
complete machine is approved to meet the EC machine directives.