Page 4
BSS-Streaming Service
BSS-Case
Page 5
• Only use connection devices that are compatible with the connec‐
tion values of the ATEM Mini / Lilliput A11-10.1“ field monitor. Fur‐
ther information can be found in the operating instructions of the re‐
spective manufacturer.
• If foreign bodies / liquids have penetrated through the ventilation
openings of the BSS case, pull out the power plug immediately and
contact our service department.
• To avoid scratches, place a soft, thin cloth between the screen and
the ATEM Mini during storage and transport.
• Store the BSS case in a dry and clean environment.
• Have the case repaired only by qualified specialists and only with
original spare parts.
• Do not use the case again if the on / off switch is defective, the fan is
not operating or any other built-in component or part is defective.
• As long as no ATEM Mini or ATEM Mini Extreme is installed in the
case, there is a risk of tipping over due to the changed center of gra‐
vity. Therefore, when opening the cover, hold the case in a horizontal
position with the help of a second person until the installation is
complete.
• Current information can be found at https://bss-streamingservice.de
/download/
Proper use
The BSS case is intended to transmit and record live streams with
proper use of the available connection options of a built-in ATEM Mini
in dry, clean and dust-free environments. The correct position for the
case while in use is only in a lying position with the lid open.
Operating instruction EN
DOC-000001
Validity
These instructions apply to the following BSS case models and their op‐
tions.
Safety instructions
• Please read all instructions and illustrations prior to the initial use of
your device. Proceed accordingly. Non-observance of the operating
instructions and safety notes can lead to electric shock, fire or seri‐
ous injuries!
• Unless otherwise stated, the instructions and safety information ap‐
ply to both the ATEM Mini case and the ATEM Mini Extreme case.
• Only use the case lying down with its lid open and in consideration
of the ambient conditions.
• Do not use the BSS case in the rain or under the influence of water or
humidity.
• Do not open the screwed covers or flaps.
• Keep the case dry and clean.
• Do not lean on the ATEM Mini cover plate in the case.
• Avoid impact or excessive pressure on the case and its components.
• Always disconnect the case from the power supply after use by first
disconnecting the components using the on / off switch and then
pulling the power plug.
model name
item number
from model year
BSS-Case Economic
ART-000252
03/2022
BSS-Case Basic
ART-000033
05/2021
BSS-Case Professional
ART-000129
05/2021
BSS-Case Extreme
ART-000247
04/2022
BSS-Case Professional Extreme
ART-000277
04/2022
