Brütsch Rüegger 148 460, Руководство пользователя

Страница: 115 / 187

6 - 17
No. 99MBB079A
6. SAVING/OUTPUTTING/COMMUNICATING THE MEASUREMENT RESULTS
■
Setting procedure
4
5
2
1
[MODE/ESC]
Change the number (if necessary)
with the [CUTOFF
↑
] or [
↓
] key,
then press the [REMOTE
←
] key.
Ra
6
Ra
3
Change the number (if necessary)
with the [CUTOFF
↑
] or [
↓
] key,
then press the [REMOTE
←
] key.
Change the number (if necessary)
with the [CUTOFF
↑
] or [
↓
] key,
then press the [REMOTE
←
] key.
[n/ENT]
m
μ
m
μ
Press the [MODE/ESC] key several times in the measurement
mode until "PRN" (print item setting mode) is displayed.
The setting for the print items is displayed and the digit
(rightmost) of measurement conditions flashes on the
LCD.
0: Not printed
1: Printed
Press the [CUTOFF
↑
] key or [
↓
] key, if necessary, to
change the number, then press the [REMOTE
←
] key.
The digit (second from the rightmost) of calculated results
flashes.
0: Not printed
1: Printed
Press the [CUTOFF
↑
] key or [
↓
] key, if necessary, to
change the number, then press the [REMOTE
←
] key.
The digit (third from the rightmost) of a measured profile
flashes.
0: Not printed
1: Printed
Press the [CUTOFF
↑
] key or [
↓
] key, if necessary, to
change the number, then press the [REMOTE
←
] key.
The digit (leftmost) of a BAC flashes.
0: Not printed
1: Printed
If the required setting has been displayed, press the [n/ENT]
key to load the setting.
After loading the setting, the SJ-201P returns to the
measurement mode.