Brush Bandit 65A, Инструкция по эксплуатации и каталог запасных частей

Страница: 38 / 72

Bandit
PRINTED 4/02 PAGE 24
MODELS 65A & 65AW CONTROLS
CONSULT THE ENGINE MANUFACTURER’S MANUAL FOR
SPECIFIC CONTROLS FOR TYPICAL GASOLINE ENGINES
1)a. Ignition Switch:
Turn the ignition switch key clockwise one stop (on position) to turn the
electrical system on. The key should remain in the on position while the
engine is running. Turn the key fully clockwise (start position) this will
start the engine. To shut off the engine, return the key to the off position.
1)b. On/Off Switch - Push Button Start:
Some gasoline engines may have a Toggle Switch or an On/Off Switch
combined with a push button to start the engine. First turn the On/Off
Switch or Toggle Switch to the on position, then depress and hold the
Push Button Start until the engine starts, then release the button. To shut
off the engine, return the On/Off Switch or Toggle Switch to the off position.
2) Choke Adjustment:
Pull the choke lever out to choke the engine.
Push the choke lever in for normal engine operations.
3) Throttle Adjustment:
Some gasoline engines may have a knob or a handle for the throttle
adjustment. Typically you would pull the knob out, or turn the handle to
increase the engine R.P.M.’s. To decrease you would push in the knob
or turn the handle the opposite way.
CONSULT THE ENGINE MANUFACTURER’S MANUAL
FOR SPECIFIC CONTROLS FOR TYPICAL DIESEL ENGINES
1) Ignition Switch With Preheat:
The typical diesel engine may have a preheat system to assist in starting
the engine during cold weather. To activate the preheat system, continue
to hold the ignition key in the Preheat position for 15 to 20 seconds, then
attempt to start the engine. If the engine fails to start within 15 seconds,
return the key to the Preheat position, hold 10 seconds, and try starting
again.
2) Throttle Adjustment Knob:
Some diesel engines will have a throttle adjustment knob. Typically you
would pull the knob out to increase engine R.P.M.’s. To decrease the
engine R.P.M.’s you would push in the knob.
3) Alternator Warning Light:
This light will glow when the alternator is not charging, or when
the ignition switch is turned on and the engine is not running.
4) Oil Pressure Warning Light:
This light will glow when the oil pressure is to low, or when
the ignition switch is turned on and the engine is not running.
5) Engine Temperature Warning Light:
This light will glow when the engine, or engine coolant, is above normal operating temperature. If this occurs allow
the engine temperature to cool down. If the engine is overheating because of a loss of coolant, or a broken fan belt,
shut the engine off immediately.