Brush Bandit 65A, Инструкция по эксплуатации и каталог запасных частей

Страница: 44 / 72

Bandit
PRINTED 4/02 PAGE 30
MODELS 65A & 65AW MAINTENANCE SECTION
MAINTENANCE CHECK SHEET
WEEKLY
1) Check anvil clearance, tightness, and wear.
2) Check alternator and fan belts on engine.
3) Check spring tension on feedwheel system.
4) Check and retighten fuel tank, hydraulic tank mount bolts.
5) Check, retighten wheel lug nuts.
1) Check hydraulic pressure on the feedwheel system. Set to 1500 PSI.
2) Check feedwheel teeth for sharpness.
3) Check towing hitch for wear, keep greased.
4) Replace hydraulic oil filter every 3 months or 400 hours.
5) Check and fill tires to rated pressure.
6) Check discharge, and infeed hopper for wear.
7) Check and grease wheel bearings, follow axle MFG. instructions.
8) Inspect tapered feedwheel motor connection.
MONTHLY
1) Check the condition of your knives.
2) Check chipper hood hinge.
3) Check hood lock pin and padlock.
4) Check entire machine for loose parts or components.
5) Check and/or adjust belt tension.
6) Check and secure all guards.
7) Check and torque set screws and/or clamp bolt on hydraulic motor
connection. Make sure both pump and motor are fully inserted into shaft.
8) Check engine oil, coolant levels, and correct engine speed.
Follow ENGINE MFG. manual specs.
9) Check air cleaner, precleaner.
10) Check hydraulic oil level.
11) Check for oil or fuel leaks.
12) Grease all bearings daily.
13) Check clutch engagement, tension and lubrication.
Frequently adjust and grease, per PTO manufacturers manual.
14) Check the safety decals, replace if damaged.
15) Properly torque knife bolts and nuts.
16) Inspect / replace axle dust caps, or grease axles.
17) Check chipper disc assembly.
DAILY
O.K. Repaired
O.K. Repaired
O.K. Repaired