Brush Bandit 65A, Инструкция по эксплуатации и каталог запасных частей

Страница: 33 / 72

Bandit
PRINTED 4/02 PAGE 19
MODELS 65A & 65AW AUTOFEED OPTIONS
AUTOFEED OPTIONS
AUTOFEED SYSTEM
When processing material through the chipper, the feed system will automatically stop when the
engine drops below a preset RPM point. The engine is constantly being monitored by an adjustable
electronic speed switch. The switch can be adjusted so that at a given RPM, an electronic relay
system will operate the hydraulic solenoid valves. The Autofeed system will stop the feed for a set
period of time until the engine has recovered speed. The Autofeed system will then automatically
turn the feed on to resume forward travel.
Do to required components and equipment options a chipper may have various types or brands of
Autofeed systems. Each chipper is shipped with the original manufacturer’s manual for the Autofeed
system it is equipped with. Consult the original manufacturer’s manual for your chippers Autofeed
operating and maintenance procedures.
For the approximate Autofeed settings and trouble shooting on all optional Autofeed systems refer
to pages 20 & 21 of your chipper manual.
LOCATION PART NUMBER DESCRIPTION
1. 900-2905-71 Digital E-290 Autofeed (Black Face)
2. 900-2904-85 Round Digital Autofeed (See Through Face)
PART NUMBERS FOR AUTOFEED DIGITAL TACH HOUR METERS
1.
2.