Technical data
and start-up
NLG5 charger
48
PROCEDURE STEP
ILLUSTRATION / OTHER INFORMATION
6.
Connect the
control plug
with the charger.
Ensure that the control plug clicks into place
and sits firmly.
---
7.
Configure the charger.
---
8.
Wire up the modular plug to the battery cable.
See chapter
---
9.
Position the battery cable in the vehicle.
Do not build any of the electrical connections
yet!
---
10.
Connect the battery cable (
output modular plug)
(1)
with the charger. Close the locking clip (2).
INSTRUCTION
Pay attention to the cable colours when connecting the battery cable to the HV battery!
Battery
+ = brown (when using the BRUSA KB51A battery cable)
Battery
-
= blue (when using the BRUSA KB51A battery cable)
Incorrect polarity can lead to damages to the charger!
11.
Connect the battery cable to the HV battery.
Make sure, that the used battery has a Pre-
charging contactor! For more information see
chapter
Connecting without pre-charging contactor
can lead to voltage spikes and can damage
the charger!
---
