Brusa NLG513, Технические данные и запуск

Страница: 36 / 71

Technical data
and start-up
NLG5 charger
36
6.8.4.13 Pin 21 TS2, Pin 22 TS3
Internal wiring
22k
470p 47n ±
48V
+5V
Analog
Multi-
plexer
Pin 21 TS2
Pin 22 TS3
33k

At the pins 21 TS2 and 22 TS3 , the included temperature sensors (NTC with 33
kΩ at 25°C) can be
connected. The temperature of the HV battery can be monitored and analysed with these temperature
sensors.
INSTRUCTION
The number of connected temperature sensors must be configured in the included ChargeStar
software. A temperature sensor which is not connected but configured leads to an error report and
thereby shuts the charger down!
6.8.4.14 Pin 23 PI
Internal wiring
22k
470p 47n ±
48V
+5V
Analog
Multi-
plexer
Pin 23
PI
1k

Pin 23 PI reduces the maximum mains current. Reduction is necessary if the fuse protection of the power
infrastructure is < 16 A.

The reduction takes place through the connection of a resistor between pin 23 PI and ground GND (e.g. via
pin 8 PG1 ).

For details on this, see chapter 6.14.7 Power Indicator.