67
Technical information
and start-up
BSC624-12V-B
10
Operation
10.1
Installation and operation of the PARAM software
The PC software folder of the customer package includes the software
PARAM_2.0.zip
. For the
PARAM_Manual_Installation_Usage
manual, refer to Manuals. This manual describes the installation of the
required PCAN_API drivers as well as of the PARAM tool. Additionally, the user interface and the operating
functions of the PARAM tool are generally described.
The
BSC6_PARAM_Manual_xxxxxx
describes the operating functions of the PARAM tool for the BSC6. The
manual is field in the same folder of the customer package.
INFORMATION
All CAN applications are based on the CAN hardware of PEAK System
). For CAN communication, it is recommended to use a galvanically isolated
USB adapter with suitable 120 OHM terminating resistor:
IPEH-002022 (PCAN USB adapter)
IPEK-003003 (PCAN terminating resistor)
10.2
CVI software installation
The CVI CAN user interface can be found in the PC software folder as
CVI.zip
.
If the PARAM software has already been installed with the required drivers, the CVI folder of the Zip files
only needs to be copied to the PARAM installation folder. The CVI software does not require any further
installation steps.
If the PCAN USB adapter (dongle) is connected to the PC, the CVI and PARAM software can be started
over the “StartBSC6xx.cmd”-File.
