Bruker VANTEC-1, Руководство пользователя

Страница: 116 / 143

Preventive Maintenance and Troubleshooting VÅNTEC-1 Detector User Manual
10 - 4 M88-E01072
10.3 Troubleshooting
1. Display data in the XRD COMMANDER
window has flatlined or is nonexistent.
• Ensure that the detector type VÅNTEC-1
PSD is selected in the Details tab of the
COMMANDER program.
• Ensure that the detector setting matches the
factory setting and the setting in the Config
program.
Set the detector to the factory setting using
the Set Detector button.
Update the config file.
1.1 If external FDC is used, is data now
present on the FDC controller display?
If the FDC displays data, check the inter-
connect cables.
If the FDC does not display data, check if
the HV Enable button is illuminated.
2. The High Voltage Enable button is not
illuminated.
• Press the High Voltage Enable button.
If the switch lights, the high voltage is
enabled.
If the switch is still not lit, check the Power
ON switch on the VÅNTEC-1 controller or
D8 enclosure.
• Use a continuity checker or ohmmeter to
verify the condition of the fuse. Visual
inspection is not a reliable method for deter-
mining the fuse condition. If you do not have
access to one of the above instruments,
replace the suspect fuse with a new fuse.
3. There is no communication to the sys-
tem and the following error appears:
“Time Out Reading from Socket.”
• Check the network cable connections and
network card.
• Check the network setting in the Config pro-
gram file.
• Connect a serial cable and attempt to
recover communications from the Config
program (see Section 6.5).