UNCRATING
rbl2010-002-011_a
TYPICAL
1. Side strap
rbl2014-004-032a
LH FRONT ILLUSTRATED
1. Front strap, each side
NOTE:
The steps to follow are describes using
two methods for lifting the front of the vehicle
from the crate base. The conventional method
uses a hydraulic jack and the alternate method
uses a chain block. Use the proper method ac-
cording to your shop layout.
Conventional Method
1. Remove piece of wood located at the front of
the vehicle.
NOTE:
This piece of wood can be used to level the
jack.
rbl2013-003-003_a
TYPICAL
1. Wood piece to remove
2. Install a floor jack with a piece of wood on top
to increase contact surface of jack pad.
rbl2013-003-004_a
TYPICAL - FRONT OF VEHICLE
1. Jack
2. Wood piece
3. Wood piece removed earlier
CAUTION
Approach with care when vehi-
cle is jacked because it may be unstable.
3. Lift the vehicle.
PREDELIVERY
2014-2
7 / 39
