FINAL INSPECTION
To set the minutes:
Select CLOCK in main category of Preferences
Screen.
rmo2011-001-201_a
Select MINUTES in secondary category.
Adjust the unit value using the UP and DOWN ar-
row.
Selecting the Hour Mode
To select the 12/24 hour mode:
Select CLOCK in main category of Preferences
Screen.
rmo2011-001-203_a
Select 12/24 HOUR in secondary category.
Select the appropriate value in main unit or set-
ting.
Language Setting
In the preferences screen, choose:
– Languages
– Select the appropriate language from the avail-
able selections.
ASSEMBLY INSPECTION
Inspect the following parts to make sure that the
vehicle is properly assembled.
NOTE:
Ensure that all protective materials are re-
moved from vehicle.
– Front compartment cover and seat locks
– Passenger grab handles
– Front wheel lug nut torque (must be 105 N•m
(77 lbf•ft))
– Suspension arm ball joint cotter pins
– Tie rod end nuts and cotter pins
– Rear axle nut and cotter pin
– Gearshift pedal operation
– Parking brake pedal and cable operation
– Brake lines
– Foot pegs.
NOTE:
Refer to the Predelivery Check List to con-
firm that all items are covered by your inspection.
FINAL INSPECTION
Vehicle Test Run
Ride the vehicle to ensure proper operation of all
systems and components.
NOTE:
It is normal for the shock absorbers to not
provide their optimal performance during the first
test ride. They will be set after a few suspension
strokes.
1. Instrument
cluster
operation
and
indica-
tor-warning pilot lamps functioning on power
up.
2. Display of safety message in cluster.
3. Starter interlock mechanism operation.
3.1 Press start button to make sure engine can
not be started if M button is not depressed
to acknowledge safety message.
4. Cluster mode button and set button operation.
5. Check for error messages in cluster and correct
if necessary.
6. Verify that both ignition keys allow the engine
to start.
7. Brake operation.
– The brake pedal is in front of the right foot-
peg.
– Press it down to operate.
– This pedal brakes all three wheels.
7.1 Ensure brake pedal is firm when pressure
is applied and that it returns freely.
8. Parking brake operation.
– The parking brake pedal is behind the opera-
tor's left footpeg. This pedal brakes only the
rear wheel.
8.1 Press it down firmly until it locks to apply
the parking brake.
8.2 Firmly press the pedal down a second time
to release the parking brake.
PREDELIVERY
2014-2
37 / 39
